The Laserworld PL-50.000RGB Hydro show laser used diode only laser source with excellent white balance, and linear color fading behaviour with ultra high beam visibility. The guaranteed output power at aperture is 48,000 mW, broken into the 3 primary diodes with individual power ratings of; 15,000 mW / 638 nm (red), 15,000 mW / 520 nm (green), 20,000 mW / 450 nm (blue). While the high-speed 35kpps scanners (@ 8° ILDA ) allow for a smooth and detailed show, capable of a scan angle of up to 50%.

The Laserworld PL-50.000RGB Hydro come standard with a ShowNET mainboard for direct connetion and use with software like Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface. They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, ArtNET or the via the auto and single file modes.

The PL-30000RGB MK3 comes with the integrated ShowNET network interface (mainboard) which provides a host of connectivity and control options. ShowNET provides direct connection and control of the laser system via a Cat5e or Cat6 cable and free Show Editor software, downloadable from the Laserworld website. The mainboard also enables stand alone function with auto mode, and static pattern selections for various applications. One of th biggest benefit of the ShowNET interface is the ability to create and upload your own patterns / show files directly to the laser via the Admin Tool allowing use with static pattern selection or DMX control. Laser safety is also very easily managed withe the ability to set the lasers, output, scan area, and safety zones then save directly to the lasers mainboard, creating a master safety that ensures safe operation of the laser system.

The Laserworld PL-30000RGB MK3 provides a guarunteed output (minimum) of 30,000 mW at the apperature and has a beam diameter of about ca. 6.5 mm and beam divergence of ca. 1.0 mrad. Delivering exceptional visiblity of the beams even with low atmospheric effects. The laser power is broken into the 3 primary diodes with individual power ratings of; 9,000 mW / 638 nm (red), 12,000 mW / 520 nm (green), and 12,000 mW / 450 nm (blue). While the ultra-fast 40kpps scanners (@ 8° ILDA ) allow for a smooth and detailed show, capable of a scan angle of upto 50%.

The complete projector is built with a sealed IP54 housing and is cooled through the external cooling fins (bottom part), ensuring that the maintenance of the laser system is kep to a minimum. At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.

The PL-20000RGB MK3 comes with the integrated ShowNET network interface (mainboard) which provides a host of connectivity and control options. ShowNET provides direct connection and control of the laser system via a Cat5e or Cat6 cable and free Show Editor software, downloadable from the Laserworld website. The mainboard also enables stand alone function with auto mode, and static pattern selections for various applications. One of th biggest benefit of the ShowNET interface is the ability to create and upload your own patterns / show files directly to the laser via the Admin Tool allowing use with static pattern selection or DMX control. Laser safety is also very easily managed withe the ability to set the lasers, output, scan area, and safety zones then save directly to the lasers mainboard, creating a master safety that ensures safe operation of the laser system.

The Laserworld PL-20000RGB MK3 provides a guarunteed output (minimum) of 20,000 mW at the apperature and has a beam diameter of about ca. 6.5 mm and beam divergence of ca. 1.0 mrad. Delivering exceptional visiblity of the beams even with low atmospheric effects. The laser power is broken into the 3 primary diodes with individual power ratings of; 6,000 mW / 638 nm (red), 8,000 mW / 520 nm (green), and 8,000 mW / 450 nm (blue). While the ultra-fast 40kpps scanners (@ 8° ILDA ) allow for a smooth and detailed show, capable of a scan angle of upto 50%.

The complete projector is built with a sealed housing and is cooled through the external cooling fins (bottom part), ensuring that the maintenance of the laser system is kep to a minimum.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.

The PL-5000RGB MK3 comes with the integrated ShowNET network interface (mainboard) which provides a host of connectivity and control options. ShowNET provides direct connection and control of the laser system via a Cat5e or Cat6 cable and free Show Editor software, downloadable from the Laserworld website. The mainboard also enables stand alone function with auto mode, and static pattern selections for various applications. One of th biggest benefit of the ShowNET interface is the ability to create and upload your own patterns / show files directly to the laser via the Admin Tool allowing use with static pattern selection or DMX control. Laser safety is also very easily managed withe the ability to set the lasers, output, scan area, and safety zones then save directly to the lasers mainboard, creating a master safety that ensures safe operation of the laser system.

The Laserworld PL-5000RGB MK3 provides a guarunteed output (minimum) of 5,000 mW at the apperature and has a beam diameter of about ca. 5.0 mm and beam divergence of ca. 1.0 mrad. Delivering exceptional visiblity of the beams even with low atmospheric effects. The laser power is broken into the 3 primary diodes with individual power ratings of; 1,200 mW / 638 nm (red), 1,700 mW / 520 nm (green), and 3,000 mW / 450 nm (blue). While the ultra-fast 40kpps scanners (@ 8° ILDA ) allow for a smooth and detailed show, capable of a scan angle of upto 50%.

The complete projector is built with a sealed housing and is cooled through the external cooling fins (bottom part), ensuring that the maintenance of the laser system is kep to a minimum.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.

The PL-10000RGB MK3 comes with the integrated ShowNET network interface (mainboard) which provides a host of connectivity and control options. ShowNET provides direct connection and control of the laser system via a Cat5e or Cat6 cable and free Show Editor software, downloadable from the Laserworld website. The mainboard also enables stand alone function with auto mode, and static pattern selections for various applications. One of th biggest benefit of the ShowNET interface is the ability to create and upload your own patterns / show files directly to the laser via the Admin Tool allowing use with static pattern selection or DMX control. Laser safety is also very easily managed withe the ability to set the lasers, output, scan area, and safety zones then save directly to the lasers mainboard, creating a master safety that ensures safe operation of the laser system.

The Laserworld PL-10000RGB MK3 provides a guarunteed output (minimum) of 5,000 mW at the apperature and has a beam diameter of about ca. 5.5 mm and beam divergence of ca. 1.0 mrad. Delivering exceptional visiblity of the beams even with low atmospheric effects. The laser power is broken into the 3 primary diodes with individual power ratings of; 3,200 mW / 638 nm (red), 4,000 mW / 520 nm (green), and 4,000 mW / 450 nm (blue). While the ultra-fast 40kpps scanners (@ 8° ILDA ) allow for a smooth and detailed show, capable of a scan angle of upto 50%.

The complete projector is built with a sealed housing and is cooled through the external cooling fins (bottom part), ensuring that the maintenance of the laser system is kep to a minimum.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.

Guaranteed output power at aperture is 5’000 mW and individual power are: 1’200 mW / 638 nm (red), 1’700 mW / 520 nm (green), 3’000 mW / 450 nm (blue).
Fast scanners work at a speed of 40kpps@8° ILDA and can do a max. scan angle of 50°.

The complete projector is built with sealed housing technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through push buttons. Additionally the scan safety can be set at the backside of the laser system.

Each laser unit has a built-in ShowNET network interface for Showcontroller and Showeditor, or can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA connections. The PL-5000RGB mkII also inlcudes a built-in memory with pre-set patterns, that can be easily triggered through DMX / ArtNET, and automatic modes.

The integrated ShowNET allows you to directly control the laser from your PC  via the a LAN style connection, allowing you to create custom laser shows to captivate your audience. Another key feature is the ability to edit and save the internal preset patterns, allowing users to create and save a show or scene to the interal mememory to then be triggered via DMX or ArtNET. Making it the perfect fit for use with larger lighting shows from a single DMX console.