Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special “floating ground” circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
Palmer PAN02 Active DI Box
Login to view prices
Master Carton:
Key Features:
- Active 1-channel DI box with premium balancing transformers
- 10Hz –40 kHz frequency response, high dynamic response
- -30 dB input attenuation, switchable
- Ground lift switch for each output
- Balanced mono summed output
- Can be powered with 9 to 24 V DC mains adapters or phantom power
Technical Data
| Product type: | DI Boxes |
|---|---|
| Type: | Active |
| Channels: | 1 |
| Inputs: | 1 |
| Input connectors: | 6.3 mm jack |
| Max. input level: | + 45 dBu |
| Input impedance: | (@ 60 Hz) 1 M Ohm(s) |
| Input pad: | 0 / -30 dB |
| Outputs: | 1 |
| THRU outputs/channel: | 1 |
| Output connectors: | 6.3 mm jack , XLR |
| Max. output level: | + 10 dBu |
| Output impedance: | 600 Ohm(s) |
| Frequency response: | 10 – 20000 Hz |
| Transformer balanced: | Yes |
| Ratio: | 1 : 1 |
| Controls: | Attenuator , ground lift |
| Operating voltage: | +48 V phantom power , 9 V block |
| Power consumption: | 3.8 mA (9V) , 4 mA (48V) |
| Cabinet material: | Sheet steel |
| Cabinet surface: | Powder coated |
| Dimensions: | 110 x 73 x 42 mm |
| Weight: | 0.36kg |